View VN808-E_7383170.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

february 2010 doc id 11455 rev 8 1/22 22 VN808-E octal channel hi gh side driver features v cc /2 compatible input junction overtemperature protection case overtemperature protection for thermal independence of the channels current limitation shorted load protection undervoltage shut-down protection against loss of ground very low stand-by current compliance to 61000-4-4 iec test up to 4 kv description the VN808-E is a monolithic device designed in stmicroelectronics vipower m0-3 technology, intended for driving any kind of load with one side connected to ground. active current limitatio n combined with thermal shutdown and automatic restart, protect the device against overload. in overload condition, channel turns off and back on automatically so as to maintain junction temperature between t tsd and t r . if this condition makes case temperature reach t csd , overloaded channel is turned off and will restart only when case temperature has decreased down to t cr (see waveform 3 figure 8 on page 11 ). non overloaded channels continue to operate normally. device automatically turns off in case of ground pin disconnection. this device is especially suitable for industrial applications conform to iec 61131 type r ds(on) (1) 1. per channel i out (1) v cc VN808-E 150 m 0.7 a 45 v powerso-36 www.st.com
contents VN808-E 2/22 doc id 11455 rev 8 contents 1 maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 current, voltage conventions and internal diagram . . . . . . . . . . . . . . . 8 5 switching time waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 6 reverse polarity protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 7 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 7.1 footprint recommended data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 7.2 tube shipment information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 7.3 tape and reel shipment information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 8 order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
VN808-E maximum ratings doc id 11455 rev 8 3/22 1 maximum ratings table 1. absolute maximum rating symbol parameter value unit v cc dc supply voltage 45 v -i gnd dc ground pin reverse current tran ground pin reverse current (pulse duration < 1ms) -250 -6 ma a i out dc output current internally limited a -i out reverse dc output current -2 a i in dc input current 10 ma v in input voltage range -3/+v cc v v esd electrostatic discharge (r = 1.5 k ; c = 100 pf) 2000 v p tot power dissipation at t c = 25 c 96 w l max max inductive load (v cc = 24 v, r load = 48 , t a = 100 c) 2h t j junction operating temperature internally limited c t c case operating temperature internally limited c t stg storage temperature -40 to 150 c table 2. thermal data symbol parameter value unit r thjc thermal resistance junction-case max 1.3 c/w r thja thermal resistance junction-ambient (1) 1. when mounted on fr4 printed circuit board with 0.5 cm 2 of copper area (at least 35 m think) connected to all tab pins. max 50 c/w
electrical characteristics VN808-E 4/22 doc id 11455 rev 8 2 electrical characteristics (10.5 v < v cc < 32 v; -40 c < t j < 125 c ; unless otherwise specified) table 3. power section symbol parameter test conditions min typ max unit v cc operating supply voltage 10.5 45 v v usd undervoltage shutdown 710.5v r on on state resistance i out = 0.5 a; t j = 25 c i out = 0.5 a; 150 185 280 m m i s supply current off state; v cc = 24 v; t case = 25 c on state (all channels on); v cc = 24 v, t case = 100 c 150 12 a ma i lgnd output current at turn-off v cc = v stat = v in = v gnd = 24 v v out = 0 v 1ma i l(off) off state output current v in = v out = 0 v ; 05 a v out(off) off state output voltage v in = 0 v , i out = 0 a 3 v t d(vccon) power-on delay time from v cc rising edge figure 7 on page 10 1ms table 4. switching (v cc = 24 v) symbol parameter test co nditions min typ max unit t on turn-on time r l = 48 from 80% v out figure 6. 50 100 s t off turn-off time r l = 48 to 10% v out figure 6. 75 150 s dv out/ dt (on) turn-on voltage slope r l = 48 from v out = 2.4 v to v out = 19.2 v figure 6. 0.7 v / s dv out/ dt (off) turn-off voltage slope r l = 48 from v out = 21.6 v to v out = 2.4 v figure 6. 1.5 v / s
VN808-E electrical characteristics doc id 11455 rev 8 5/22 table 5. input pin symbol parameter test conditions min typ max unit v inl input low level v cc /2-1 v i inl low level input current v in = v cc / 2 - 1 v 80 ? v inh input high level v cc /2+1 v i inh high level input current v in = v cc / 2 + 1 v 150 260 ? v i(hyst) input hysteresis voltage 0.6 v i in input current v in = v cc = 32 v 300 ? table 6. protections symbol parameter test co nditions min typ max unit t csd case shut-down temperature 125 130 135 c t cr case reset temperature 110 c t chyst case thermal hysteresis 715 c t tsd junction shutdown temperature 150 175 200 c t r junction reset temperature 135 c t hyst junction thermal hysteresis 715 c i lim dc short circuit current per channel v cc = 24 v; r load = 10 m 0.7 1.7 a v demag turn-off output clamp voltage i out = 0.5 a; l = 6 mh v cc -57 v cc -52 v cc -47 v table 7. status pin symbol parameter test conditions min typ max unit i hstat high level output current v cc = 18...32 v; r stat = 1 k (fault condition) 234ma i lstat leakage current normal operation; v cc = 32 v 0.1 a v clstat clamp voltage i stat = 1 ma i stat = -1 ma 6.0 6.8 -0.7 8.0 v v
pin connections VN808-E 6/22 doc id 11455 rev 8 3 pin connections figure 2. connection diagram (top view) table 8. pin functions pin n symbol function ta b v cc positive power supply voltage 1v cc positive power supply voltage 2,3,4,5 nc not connected 6 input 1 input of channel 1 7 input 2 input of channel 2 8 input 3 input of channel 3 9 input 4 input of channel 4 10 input 5 input of channel 5 11 input 6 input of channel 6 12 input 7 input of channel 7 13 input 8 input of channel 8 14,15,16,17,18 nc not connected 19 gnd logic ground 20 status common open source diagnostic for overtemperature 21,22 output 8 high-si de output of channel 8 23,24 output 7 high-si de output of channel 7 25, 26 output 6 high-si de output of channel 6
VN808-E pin connections doc id 11455 rev 8 7/22 27. 28 output 5 high-si de output of channel 5 29, 30 output 4 high-si de output of channel 4 31, 32 output 3 high-si de output of channel 3 33, 34 output 2 high-si de output of channel 2 35, 36 output 1 high-si de output of channel 1 table 8. pin functions (continued) pin n symbol function
current, voltage conventions and internal diagram VN808-E 8/22 doc id 11455 rev 8 4 current, voltage conventions and internal diagram figure 3. current and voltage conventions figure 4. equivalent internal block di agram (same structure for all channel) outn gnd inn vcc status 50v 50v 52v 6.8v 13 110k
VN808-E current, voltage conventions and internal diagram doc id 11455 rev 8 9/22 figure 5. application example table 9. truth table conditions inputn outputn status normal operation l h l h l l current limitation l h l x l l overtemperature (see waveforms 3, 4 figure 8 ) -> t j > t tsd l h l l l h undervoltage l h l l x x vcc24v - 28,2v iec61131 22f 100nf load 1 load 2 load 3 load 8 vn808 status vin 1 vin 2 vin 8 vin 3 imax 80a load 1 load 2 load 3 load 8 vn808 status vin 1 vin 2 vin 8 vin 3 imax 80a 22f 100nf vcc24v - 28,2v iec61131 22f 100nf load 1 load 2 load 3 load 8 vn808 status vin 1 vin 2 vin 8 vin 3 imax 80a load 1 load 2 load 3 load 8 vn808 status vin 1 vin 2 vin 8 vin 3 imax 80a load 1 load 2 load 3 load 8 vn808 status vin 1 vin 2 vin 8 vin 3 imax 80a 22f 100nf vcc24v - 28,2v iec61131 22f 100nf load 1 load 2 load 3 load 8 vn808 status vin 1 vin 2 vin 8 vin 3 imax 80a load 1 load 2 load 3 load 8 vn808 status vin 1 vin 2 vin 8 vin 3 imax 80a load 1 load 2 load 3 load 8 vn808 status vin 1 vin 2 vin 8 vin 3 imax 80a load 1 load 2 load 3 load 8 vn808 status vin 1 vin 2 vin 8 vin 3 imax 80a 10nf . . . . . ... . . rgnd rgnd vcc24v - 28,2v iec61131 10nf v c c / 2 c o m p a t i b l e i n p u t s . . . . . ... . . rgnd rgnd vcc24v - 28,2v iec61131 22f 100nf vcc24v - 28,2v iec61131 22f 100nf vcc24v - 28,2v iec61131 22f 100nf 22f 100nf load 1 load 2 load 3 load 8 vn808 status vin 1 vin 2 vin 8 vin 3 imax 80a load 1 load 2 load 3 load 8 vn808 status vin 1 vin 2 vin 8 vin 3 imax 80a load 1 load 2 load 3 load 8 VN808-E status vin 1 vin 2 vin 8 vin 3 imax 80a filter for bus inductance effect., make supply voltage stable and avoid undervoltage shut-down emc filter protection for iec 61000-4-5 surge test suggested 1,5ke39xx optional protection for v cc disconnection. protection against iec 61000-4-6 current injection test 10 protection against disconnection on inductive loads protections included in the device: iec 61000-4-2 esd test better than 2kv human body model ? iec 61000-4-4 burst test status output current from 2 to 4 ma
switching time waveforms VN808-E 10/22 doc id 11455 rev 8 5 switching time waveforms figure 6. turn-on and turn-off figure 7. v cc turn-on
VN808-E switching time waveforms doc id 11455 rev 8 11/22 figure 8. waveforms
switching time waveforms VN808-E 12/22 doc id 11455 rev 8 figure 8. waveforms (continued)
VN808-E reverse polarity protection doc id 11455 rev 8 13/22 6 reverse polarity protection this schematic can be used with any type of load. the following is an indication on how to dimension the r gnd resistor. r gnd = (-v cc ) / (-i gnd ) where -i gnd is the dc reverse ground pin current and can be found in the absolute maximum rating section of the device datasheet. power dissipation in r gnd (when v cc < 0: during reverse polarity situations) is: pd = (-v cc ) 2 /r gnd note: in normal condition (no reverse polarity) due to the diode there will be a voltage drop between gnd of the device and gnd of the system. figure 9. reverse polarity protection status input i gnd output i + vcc r gnd load diode status input i gnd output i + vcc r gnd load diode
package mechanical data VN808-E 14/22 doc id 11455 rev 8 7 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com. ecopack is an st trademark. table 10. powerso-36 mechanical data dim. mm inch min. typ. max. min. typ. max. a 3.60 0.1417 a1 0.10 0.30 0.003 0.0118 a2 3.30 0.1299 a3 0 0.10 0 0.0039 b 0.22 0.38 0.008 0.0150 c 0.23 0.32 0.009 0.0126 d (1) 15.80 16.00 0.622 0.6299 d1 9.40 9.80 0.370 0.3858 e 13.90 14.50 0.547 0.5709 e1 (1) 10.90 11.10 0.429 0.4370 e2 2.90 0.1142 e3 5.8 6.2 0.228 0.2441 e 0.65 0.025 e3 11.05 0.435 g 0 0.10 0.000 0.0039 h 15.50 15.90 0.610 0.6260 h 1.10 0.0433 l 0.80 1.10 0.031 0.0433 n 10 10 s 0 8 0 8
VN808-E package mechanical data doc id 11455 rev 8 15/22 figure 10. powerso-36 drawings
package mechanical data VN808-E 16/22 doc id 11455 rev 8 7.1 footprint recommended data figure 11. footprint recommended data table 11. footprint data dim. mm. inch a 9.5 0.374 b 14.7-15.0 0.579-0.591 c 12.5-12.7 0.492-0.500 d 6.3 0.248 e 0.46 0.018 f 0.27 0.011 g 0.65 0.026
VN808-E package mechanical data doc id 11455 rev 8 17/22 7.2 tube shipment information figure 12. tube shipment information base quantity 31 pcs. bulk quantity 310 pcs. table 12. tube mechanical data dim. mm. inch a 18.80 0.740 b 17.2 0.2 0.677 0.008 c 8.20 0.2 0.323 0.008 d 10.90 0.2 0.429 0.008 e 2.90 0.2 0.114 0.008 f 0.40 0.016 g 0.80 0.031 h 6.30 0.248 i 4.30 0.2 0.165 0.008 j 3.7 0.2 0.146 0.008 k 9.4 0.370 l 0.40 0.016 m 0.80 0.031 n 3.50 0.2 0.138 0.008
package mechanical data VN808-E 18/22 doc id 11455 rev 8 7.3 tape and reel shipment information figure 13. tape specifications base quantity 600 pcs. bulk quantity 600 pcs. table 13. tape mechanical data dim. mm. inch d 1.50 +0.1/0 0.059 +0.004/0 e 1.75 0.1 0.069 0.004 po 4.00 0.1 0.157 0.004 t max. 0.40 0.016 d1 min. 1.50 0.059 f 11.5 0.05 0.453 0.002 k max. 6.50 0.256 p2 2.00 0.1 0.079 0.004 r 50 1.968 w 24.00 0.30 0.945 0.012 p1 24.00 0.945 ao, bo, ko 0.05 min to 1.0 max. 0.002 min to 0.039 max. ,p 5 #p % 1 1p & 8 ' "p 1 6tfsejsfdujpopggffe $ 3 6tfsejsfdujpopggffe 3 #foejohsbejvt
VN808-E package mechanical data doc id 11455 rev 8 19/22 figure 14. reel specifications table 14. reel mechanical data dim. mm. inch tape size 24.0 0.30 0.945 0.012 a max. 330.0 12.992 b min. 1.5 0.059 c 13.0 0.20 0.512 0.008 d min. 20.2 0.795 n min. 60 2.362 g 24.4 +2/-0 0.960 +0.079/-0 t max. 30.4 1.197 $ ' % )xooudglxv 7dshvorwlqfruhiruwdshvwduw pplqplqzlgwk pplqplq dffhvvkroh dwvorworfdwlrq & 1 *phdvxuhg dwkxe 7
order codes VN808-E 20/22 doc id 11455 rev 8 8 order codes table 15. order codes order codes package packaging VN808-E powerso-36 tube vn808tr-e powerso-36 tape and reel
VN808-E revision history doc id 11455 rev 8 21/22 9 revision history table 16. document revision history date revision changes 13-sep-2005 1 initial release 1-mar-2007 2 document reformatted 12-mar-2007 3 typo in figure 3. 26-mar-2007 4 typo note table 2. 07-jul-2008 5 added: section 6 on page 13 04-aug-2008 6 added: figure 11: powerso-36 footprint on page 15 25-aug-2009 7 updated section 6: reverse polarity protection 24-feb-2010 8 updated section 7: package mechanical data
VN808-E 22/22 doc id 11455 rev 8 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2010 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of VN808-E

	To Download VN808-E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .